Savana 4500 V8-6.6L DSL Turbo (2009)
6. Remove the transmission mount to the transmission support crossmember retaining nuts, for 4WD vehicles.
7. Remove the transmission support crossmember to the frame mounting bolts.
8. Remove the transmission support crossmember from the vehicle.
Installation Procedure
1. Install the transmission support crossmember to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission support crossmember to the frame mounting bolts.
*
Tighten the bolts to 50 Nm (37 lb ft) , except Cutaway.
*
Tighten the bolts to 65 Nm (48 lb ft) , Cutaway.
