Savana 4500 V8-6.6L DSL Turbo (2009)
Trim Panel: Service and Repair
Body Rear Corner Garnish Molding Replacement
Body Rear Corner Garnish Molding Replacement
Removal Procedure
1. Remove the rear passenger seats when needed. Refer to Rear Bench Seat Replacement (See: Seats/Service and Repair/Rear Bench Seat
Replacement).
2. Remove the passenger side rear corner trim panel, for the passenger side of the vehicle only. Refer to Body Rear Corner Trim Panel Replacement -
Right Side (See: ).
3. Pull down on the upper corners of the garnish molding (1) in order to disengage the retaining clips.
4. Pull in order to disengage the remaining retaining clips.
5. Remove the rear corner garnish molding (1) from the vehicle.
6. Inspect the rear corner garnish molding (1) for broken or missing clips. Replace the clips as needed.
Installation Procedure
