Savana 4500 V8-6.6L DSL Turbo (2009)
1. Locate the opening (1) for the power seat switch within the bracket, through the cover.
2. Using a razor blade make a "X" cut (2) within the opening of the switch bracket.
6. Install the power seat switch. Refer to Power Seat Switch Replacement (See: Power Seat Switch/Service and Repair).
7. Locate the position of the recliner mechanism rod (6) through the cushion cover.
8. Make a small "X" cut just large enough for the recliner rod (6) to go through.
9. Slip the cover over the recliner mechanism rod (6).
10. Install the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver or Passenger Seat
Recliner Handle Replacement).
11. Position the seat back to the seat cushion assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
12. Install the bolts (3, 7) and tighten to 32 Nm (24 lb ft).
