Savana 4500 V8-6.6L DSL Turbo (2009)
1. Install the hub (1) to the brake rotor.
2. Install the rear axle hub to the brake rotor.
Align the matchmarks on the rear axle hub to the brake rotor.
3. Using a hydraulic press, press the wheel studs (1) in the hub and rotor assembly.
4. Prepare the brake caliper bracket bolts and the rear axle threaded holes for assembly.
*
Clean the brake caliper bracket bolts of any threadlocking residue
*
Clean the rear axle threaded holes of any threadlocking residue with denatured alcohol and allow to dry
5. Apply threadlocker GM P/N 89021297 (Canadian P/N 10953488) to 2/3 of the threaded length of the brake caliper bracket bolt.
6. Allow the threadlocker to cure approximately 10 minutes before assembly.
