Savana 4500 V8-6.6L DSL Turbo (2009)
Brake Caliper Replacement (With Single Rear Wheel))Rear Brake Caliper Replacement (Dual Rear Wheel) (See: Brake Caliper/Service
and Repair/Removal and Replacement/Rear Brake Caliper Replacement (Dual Rear Wheel))
*
Brake Pressure Modulator Valve Replacement (With JL4) (See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Brake
Pressure Modulator Valve Replacement (With JL4))Brake Pressure Modulator Valve Replacement (Without JL4) (See: Hydraulic
Control Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Replacement (Without JL4))
4. If the brake fluid was NOT contaminated with an oil-based or a silicone-based substance, but WAS contaminated with water or dirt, rust,
corrosion, and/or brake dust, replace the brake master cylinder reservoir cap diaphragm. The diaphragm may have allowed the moisture or
particles to enter the hydraulic system.
5. Fill the brake master cylinder reservoir to the maximum-fill level with approved brake fluid from a clean, sealed brake fluid container.
6. Pressure bleed the hydraulic brake system. Begin the procedure with the pressure bleeder reservoir filled to the maximum-fill level with the correct
brake fluid as indicated. Refer to Hydraulic Brake System Bleeding (Manual) (See: )Hydraulic Brake System Bleeding (Pressure) (See: ).
