Savana 4500 V8-6.6L DSL Turbo (2009)
9. Install the brake hose assembly to the brake caliper and tighten to 44 Nm (32 lb ft).
10. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
11. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
12. Lower the vehicle.
13. Fill the master cylinder reservoir to the proper level with clean brake fluid. Refer to Master Cylinder Reservoir Filling (See: Brake Master
Cylinder/Service and Repair/Procedures/Master Cylinder Reservoir Filling).
