Savana 4500 V8-6.6L DSL Turbo (2009)
Note: Replace all the components included in the repair kits used to overhaul the brake caliper.
1. Remove the brake caliper. Refer to Rear Brake Caliper Replacement (With Single Rear Wheel) (See: Removal and Replacement/Rear Brake
Caliper Replacement (With Single Rear Wheel))Rear Brake Caliper Replacement (Dual Rear Wheel) (See: Removal and Replacement/Rear
Brake Caliper Replacement (Dual Rear Wheel)).
2. Place a wood block between the brake caliper pistons and the brake caliper housing bridge.
Warning
Do not place fingers in front of the caliper piston(s) in an attempt to catch or protect it when applying compressed air. The piston(s) can fly out with
force and could result in serious bodily injury.
3. Place a clean shop towel between the brake caliper pistons and the block of wood.
4. Apply compressed air through the brake hose fitting inlet port and remove the brake caliper pistons (1).
5. Remove the brake caliper bleeder screw.