Savana 4500 V8-6.6L DSL Turbo (2009)
1. Lubricate the master cylinder reservoir seals (1) and the outer surface area of the reservoir-to-housing barrels with GM approved brake fluid from
a clean, sealed brake fluid container.
2. If reinstalling the master cylinder reservoir, clean the reservoir with denatured alcohol, or equivalent and allow to dry.
3. Install the master cylinder reservoir seals to the master cylinder.
Ensure the master cylinder reservoir seals are fully seated in the master cylinder body.
4. Lubricate the master cylinder reservoir-to-master cylinder barrels with GM approved brake fluid from a clean, sealed brake fluid container.
5. Carefully press the master cylinder reservoir (1) straight downward and install the reservoir to the master cylinder.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
