Savana 4500 V8-6.6L DSL Turbo (2009)
Parking Brake Lever: Service and Repair
Parking Brake Lever Pedal Assembly Replacement
Parking Brake Lever Pedal Assembly Replacement
Removal Procedure
1. Complete the pedal pin up procedure. Refer to Parking Brake Cable Adjuster Disabling (See: Parking Brake Cable/Service and
Repair/Procedures/Parking Brake Cable Adjuster Disabling).
2. Remove the release handle. Refer to Parking Brake Release Handle Assembly Replacement (See: Parking Brake Release Handle Assembly
Replacement).
3. Remove the left side kick panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
4. Remove the left floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Left Side (See: Heating and Air Conditioning/Air
Duct/Service and Repair/Floor Air Outlet Duct Replacement - Left Side).
5. Remove the pedal retaining nuts.
6. Remove the pedal from the vehicle.
7. Remove the front brake cable from the pedal.
Installation Procedure
1. Connect the front brake cable to the pedal.