Savana 4500 V8-6.6L DSL Turbo (2009)
Replacement)Starter Replacement (6.6L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Starter Replacement).
5. Remove the lower oil fill tube bolt (1).
6. Remove and discard the oil fill tube O-ring seal.
Installation Procedure
1. Install a NEW O-ring seal onto the oil fill tube.
2. Install the oil fill tube.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the lower oil fill tube bolt (1) and tighten to 21 Nm (15 lb ft).
4. Install the starter. Refer to Starter Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Starter
Replacement)Starter Replacement (4.8L/5.3L/6.0L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Starter
Replacement)Starter Replacement (6.6L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair/Starter Replacement).
5. Install the upper oil fill tube bolt (1) and tighten to 21 Nm (15 lb ft).