Savana 4500 V8-6.6L DSL Turbo (2009)
6. Install a new O-ring to the crankshaft position sensor spacer.
7. Lubricate the O-ring with engine oil.
8. Install the crankshaft position sensor spacer.
9. Install the crankshaft position sensor spacer bolts and tighten to 10 Nm (89 lb in).
10. Install a new O-ring to the crankshaft position sensor.
11. Lubricate the O-ring with engine oil.
12. Install the crankshaft position sensor.
13. Install the crankshaft position sensor bolt and tighten to 10 Nm (89 lb in).
14. Install the engine oil fill tube. Refer to Oil Filler Tube Replacement (See: Engine Lubrication/Engine Oil Dip Stick - Dip Stick Tube/Service and
Repair/Oil Filler Tube Replacement).
15. Install the water pump. Refer to Water Pump Replacement (LU3) (See: Water Pump/Service and Repair)Water Pump Replacement (LMF/LY2)
(See: Water Pump/Service and Repair)Water Pump Replacement (LMM) (See: Water Pump/Service and Repair)Water Pump Replacement
(LY6) (See: Water Pump/Service and Repair).
16. Install the crankshaft balancer. Refer to Crankshaft Balancer Removal (See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair/Crankshaft Balancer Removal).
17. Install the cooling fan pulley. Refer to Cooling Fan Pulley Installation ().
18. Install the upper oil pan. Refer to Upper Oil Pan Replacement (See: Engine Lubrication/Oil Pan/Service and Repair/Upper Oil Pan Replacement
).
19. Install the turbocharger coolant hoses/pipes - outlet. Refer to Turbocharger Coolant Hoses/Pipes Replacement (Inlet) (See: Cooling
System/Turbocharger Coolant Line/Service and Repair/Turbocharger Coolant Hoses/Pipes Replacement (Inlet))Turbocharger Coolant
Hoses/Pipes Replacement (Outlet) (See: Cooling System/Turbocharger Coolant Line/Service and Repair/Turbocharger Coolant Hoses/Pipes
Replacement (Outlet)).
20. Install the thermostat bypass pipe. Refer to Thermostat Bypass Pipes Replacement (See: Cooling System/Thermostat Bypass Hose/Service and
Repair).