Savana 4500 V8-6.6L DSL Turbo (2009)
Air Door Actuator / Motor: Service and Repair
Temperature Valve Actuator Replacement
Temperature Valve Actuator Replacement
Removal Procedure
1. Disconnect the air temperature actuator electrical connector.
2. Remove the air temperature actuator retaining screws.
3. Remove the air temperature actuator (1) from the heater assembly (2).
Installation Procedure
1. Install the air temperature actuator (1) to the heater assembly (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the air temperature actuator retaining screws and tighten to1.9 Nm (17 lb in).
3. Connect the air temperature actuator electrical connector.
Mode Actuator Replacement - Upper
Mode Actuator Replacement - Upper
Removal Procedure
1. Rotate the instrument panel (I/P) carrier out and downward. Refer to Instrument Panel Carrier Replacement (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
2. Disconnect the vacuum hose from the upper mode actuator.
3. Release the tabs from the upper mode actuator.
4. Unhook the actuator from the upper mode door lever.
