gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Control Assembly, HVAC > < Condenser HVAC|Service and Repair|Page 10036
Page 5
background image

9. Install the evaporator hose to the condenser.

10. Install the evaporator hose retaining nut (1) and tighten to16 Nm (12 lb ft).

11. Install the discharge hose to the condenser.
12. Install the discharge hose nut (2) and tighten to16 Nm (12 lb ft).
13. Install the grille. Refer to Grille Replacement (Base)   (See: Body and Frame/Grille/Service and Repair)Grille Replacement (Uplevel)   (See: Body

and Frame/Grille/Service and Repair).

14. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging   (See: Service and Repair/Refrigerant Recovery and

Recharging).

15. Leak test the fittings of the component using the J 39400-A  .

Control Assembly, HVAC > < Condenser HVAC|Service and Repair|Page 10036