Savana 4500 V8-6.6L DSL Turbo (2009)
6. Install the evaporator inlet hose nut to the front evaporator tube and tighten to16 Nm (12 lb ft).
7. Install the front evaporator tube to the condenser.
8. Install the front evaporator tube nut (1) to the condenser and tighten to16 Nm (12 lb ft).
9. Install the grille. Refer to Grille Replacement (Base) (See: Body and Frame/Grille/Service and Repair)Grille Replacement (Uplevel) (See: Body
and Frame/Grille/Service and Repair).
10. Install the coolant recover reservoir. Refer to Coolant Recovery Reservoir Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Coolant Reservoir/Service and Repair).
11. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging).
12. Leak test the fittings of the components using the J 39400-A .
