Savana 4500 V8-6.6L DSL Turbo (2009)
3. Install the module assembly nuts (5) and tighten to6 Nm (53 lb in).
4. Install the heater assembly. Refer to Heater Assembly Replacement (See: Heater Core Case/Service and Repair).
5. Install the evaporator and blower module assembly.
6. Install the evaporator and blower module assembly retaining screws.
7. Install new O-ring seals. Refer to O-Ring Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/O-Ring Replacement).
8. Install the accumulator to the evaporator.
9. Install the accumulator retaining nut (1) and tighten to18 Nm (13 lb ft).
10. Install the evaporator inlet tube to the evaporator.
