Savana 4500 V8-6.6L DSL Turbo (2009)
Fog/Driving Lamp Bulb: Service and Repair
Rear Fog Lamp Bulb Replacement
Removal Procedure
1. Remove the screws retaining the lens to the lamp.
2. Remove the lens from the lamp.
3. Gently push in on the bulb and turn the bulb 1/4 turn counterclockwise.
4. Remove the bulb from the socket.
Installation Procedure
1. Install the bulb to the socket.
2. Gently push in on the bulb and turn the bulb 1/4 turn clockwise.
3. Install the lens to the lamp assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the screws to retain the lens to the lamp assembly and tighten to 1.5 Nm (13 lb in).
