Savana 4500 V8-6.6L DSL Turbo (2009)
Fuse Block: Service and Repair
Body Wiring Harness Junction Block Replacement
Body Wiring Harness Junction Block Replacement
Removal Procedure
Warning: Refer to SIR Warning (See: Restraint Systems/Service Precautions/SIR Warning).
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the drivers seat. Refer to Driver or Passenger Seat Replacement (See: Body and Frame/Seats/Service and Repair/Driver or Passenger
Seat Replacement).
3. Remove the junction block cover (1).
4. Remove the positive battery cable nut (2) from the junction block.