Savana 4500 V8-6.6L DSL Turbo (2009)
5. Remove the positive battery cable (3) from the junction block.
6. Disconnect the electrical connectors (1) from the junction block, if equipped with YF7.
7. Completely loosen the junction block caged bolts (2).
8. Release the tabs that retain the junction block (1) to the junction block base.
9. Remove the junction block (1) from the block base.
10. Remove the junction block base nuts (1, 3).
11. Remove the wiring harness (4) from the junction block base (2).
12. Remove the junction block base (4) from the floor.
Installation Procedure
