Savana 4500 V8-6.6L DSL Turbo (2009)
Exhaust Temperature Sensor: Service and Repair
Exhaust Temperature Sensor Replacement - Position 1
Exhaust Temperature Sensor Replacement - Position 1
Removal Procedure
Caution: The exhaust temperature sensor and exhaust pressure differential sensor line fittings may be difficult to remove when the engine exhaust
system temperature is below 48°C (120°F). Excessive force may damage the threads in the exhaust manifold or exhaust pipe.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the exhaust temperature sensor electrical connector (2) from the engine wiring harness electrical connector (1).
3. Remove the exhaust temperature sensor.
Installation Procedure
