Savana 4500 V8-6.6L DSL Turbo (2009)
4. Connect the ECM electrical connectors.
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
6. If a NEW ECM was installed, program the ECM. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning).
7. Perform the turbocharger learn procedure. Refer to Turbocharger Learn (See: Fuel Delivery and Air Induction/Turbocharger/Service and
Repair/Procedures).
