Savana 4500 V8-6.6L DSL Turbo (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. If required, install the EGR bracket, the EGR bracket bolt, and nut. Tighten the bolt and nut to 25 Nm (18 lb ft).
2. Install NEW intake manifold tube gaskets (1) as required.
3. Position the EGR valve (3) to the EGR cooler tube (4).
4. Install the EGR valve to EGR cooler tube bolts (2) and tighten to 20 Nm (15 lb ft).
5. Install the EGR valve/cooler. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: EGR Cooler/Service and Repair/Exhaust Gas
Recirculation Valve Cooler Replacement).
6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair)Cooling System Draining and Filling (Vac N Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
