Savana 4500 V8-6.6L DSL Turbo (2009)
11. Remove the fuel injector bracket bolts.
12. Install J-46594 into the bolt hole in the fuel injector bracket.
13. Install a flare nut wrench onto J-46594 and pull back away from the fuel injector, until the injector releases from its seat.
14. Remove J-46594 .
15. Remove the fuel injectors with brackets.
16. Remove and discard the copper washer from the fuel injector bore.
17. Remove and discard the fuel injector O-ring from the injector.
Fuel Injector Cleaning and Inspection
Note: If reusing the old injectors perform the following: