Savana 4500 V8-6.6L DSL Turbo (2009)
Warning: Refer to Fuel Pipe Fitting Warning (See: Service Precautions/Fuel Pipe Fitting Warning).
1. Apply a few drops of clean engine oil to the male connection end.
2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
3. Once installed, pull on both sides of the connection in order to make sure the connection is secure.
4. Install the fuel fill cap.
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
