Savana 4500 V8-6.6L DSL Turbo (2009)
10. Install the fuel line bracket bolt and tighten to 25 Nm (18 lb ft).
11. Connect the fuel feed and return pipes.
12. Install the intake manifold tube. Refer to Intake Manifold Tube Replacement (LMM) (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
13. Install the charge air cooler inlet pipe. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler Hoses/Pipes Replacement (Outlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Outlet)).
14. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
15. Start the engine.
If the engine does not start, repeat the above step.
16. Inspect the fuel system for fuel leaks.
17. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
