Savana 4500 V8-6.6L DSL Turbo (2009)
2. Connect the FRT sensor electrical connector.
3. Install the fuel line retainer center of engine.
4. Install the rear fuel line retainer.
5. Install the charged air inlet tube. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (See: Turbocharger/Intercooler/Intercooler
Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler Hoses/Pipes Replacement (Outlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Outlet))
6. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair).
7. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
8. Once engine starts, inspect for leaks.
9. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
