Savana 4500 V8-6.6L DSL Turbo (2009)
Glow Plug: Service and Repair
Glow Plug Replacement - Bank 2
Glow Plug Replacement - Bank 2
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
3. If necessary, remove the right front wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and
Tires/Service and Repair).
4. Remove the wheelhouse splash shield. Refer to Wheelhouse Splash Shield Replacement (See: Body and Frame/Fender/Rear Fender/Rear Fender
Liner/Service and Repair).
5. Remove the glow plug harness nut(s).
6. Remove the harness from the glow plug(s).
7. Remove the glow plug(s).
Installation Procedure