Savana 4500 V8-6.6L DSL Turbo (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the glow plug(s) and tighten to 18 Nm (13 lb ft).
2. Install the harness to the glow plug(s).
3. Install the glow plug harness nut(s) and tighten to 1.7 Nm (15 lb in).
4. Install the right front wheel and tire. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
5. Install the wheelhouse splash shield. Refer to Wheelhouse Splash Shield Replacement (See: Body and Frame/Fender/Rear Fender/Rear Fender
Liner/Service and Repair).
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
7. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
