Savana 4500 V8-6.6L DSL Turbo (2009)
Instrument Panel/Service and Repair).
Range Selector Lever Cable Bracket Replacement
Range Selector Lever Cable Bracket Replacement
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into neutral.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Remove the retainer that secures the cable to the bracket.
5. Depress the tangs and remove the cable from the bracket.
6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
7. Remove the transmission range selector cable bracket.
Installation Procedure
1. Install the transmission range selector cable bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the transmission range selector cable bracket bolts (1) and tighten to 25 Nm (18 lb ft).
