Savana 4500 V8-6.6L DSL Turbo (2009)
8. Adjust the valve lash to 0.3 mm (0.012 in). Refer to Valve Clearance Adjustment Specifications (See: Engine, Cooling and
Exhaust/Engine/Specifications/Valve Clearance Adjustment Specifications) to determine which valves can be adjusted when the engine is at TDC.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
9. Tighten the lock nut to 22 Nm (16 lb ft).
10. Rotate the crankshaft one revolution in order to bring the number 1 cylinder to TDC of the exhaust stroke.
