Savana 4500 V8-6.6L DSL Turbo (2009)
3. Remove the seat belt retractor retaining bolts from the seat belt retractor.
4. Remove the seat belt retractor from the vehicle.
Installation Procedure
1. Install the seat belt retractor to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the seat belt retractor retaining bolts to the vehicle.
*
Tighten the seat belt retractor upper retaining bolt to 52 Nm (38 lb ft).
*
Tighten the seat belt retractor lower retaining bolt to 10 Nm (89 lb in).
3. Install the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
4. Secure the seat belt escutcheon to the rear corner garnish molding.
Seat Belt Retractor Replacement - No. 4 Right Rear
Seat Belt Retractor Replacement - No. 4 Right Rear
Removal Procedure
1. Remove the seat belt escutcheon from the rear corner garnish molding.
2. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair).
