Savana 4500 V8-6.6L DSL Turbo (2009)
Negative: Service and Repair
Auxiliary Battery Negative Cable Replacement
Battery Negative Cable Replacement (With LMM Auxiliary) (6.6L)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the battery negative cable from the auxiliary battery. Refer to Battery Negative Cable Disconnection and Connection (See: Service
and Repair).
3. Disconnect the negative ground leads from the frame.
4. Remove the battery negative cable from the vehicle.
Installation Procedure
1. Install the battery negative cable to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Connect the negative ground leads to the frame and tighten to 10 Nm (89 lb in).
3. Connect the battery negative cable to the auxiliary battery and tighten to 14 Nm (123 in lb).
