Savana 4500 V8-6.6L DSL Turbo (2009)
1. Install the battery negative cable to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Connect the battery negative cable lead to the engine block and tighten to 25 Nm (18 lb ft).
3. Connect the negative cable lead to the inner fender panel.
Tighten the nut that retains the negative cable to the inner fender well to 10 Nm (89 lb in).
4. Connect the negative cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).
Tighten the negative cable terminal bolt to 14 Nm (123 lb in).