Savana 4500 V8-6.6L DSL Turbo (2009)
7. Remove the auxiliary positive battery cable nut from the junction block.
8. Disconnect the auxiliary positive battery cable wiring harness clips.
9. Remove the auxiliary positive battery cable from the vehicle.
Installation Procedure
1. Position the auxiliary positive battery cable and connect the wiring harness clips.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Position the auxiliary positive battery cable to the junction block and tighten the cable nut to 8 Nm (71 lb in).
