Savana 4500 V8-6.6L DSL Turbo (2009)
Idler Arm: Service and Repair
Idler Arm Replacement
Special Tools
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the idler arm to relay rod retaining nut.
Discard the nut.
3. Disconnect the idler arm from the relay rod using the J 43631 .
4. Remove the idler arm to frame mounting bolts.
5. Remove the idler arm from the vehicle.
Installation Procedure
