Savana 4500 V8-6.6L DSL Turbo (2009)
1. Install the power steering cooler to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering cooler mounting bolts and tighten to 5 Nm (44 lb in).
3. Connect the power steering cooler hose to the power steering gear and tighten to 33 Nm (24 lb in).
4. Connect the power steering cooler hose to the power steering pump.
5. Lower the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).
7. Remove the drain pan from under the vehicle.
