Savana 4500 V8-6.6L DSL Turbo (2009)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Bearing Replacement
Intermediate Steering Shaft Bearing Replacement
Special Tools
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
Caution: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering
column or intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause
damage to the coil assembly.
1. Install the J 42640 in the steering column lower access hole.
2. Remove the lower intermediate shaft. Refer to Lower Intermediate Steering Shaft Replacement (See: Steering Column/Service and Repair/Lower
Intermediate Steering Shaft Replacement).
3. Remove the power steering reservoir (3) mounting nuts (4). Position power steering reservoir out of the way.