Savana 4500 V8-6.6L DSL Turbo (2009)
3. Install the bolts (1) and the yoke retainers (2) to the rear axle pinion yoke (4) and tighten to 25 Nm (18 lb ft).
4. Install the propeller shaft hanger.
5. Install the propeller shaft hanger bolts and tighten to 52 Nm (38 lb ft).
6. Install the center bearing to the bracket.
7. Install the center bearing bolts (3) and tighten to 40 Nm (30 lb ft).
8. Remove the safety stands and lower the vehicle.