gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement|Page 6953 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 6951

Savana 4500 V8-6.6L DSL Turbo (2009)

Page 5
background image

6. Turn the wheel hub over and seat the outer bearing assembly against the retaining ring using the J 24426    (2) and the J 8092    (1).
7. Ensure that the outer bearing assembly rotates freely in the hub.

8. Turn the wheel hub over and install the inner bearing cup.

9. Drive the inner bearing cup into the wheel hub using the J 24427    (2) and the J 8092    (1).

10. Install the inner bearing.

Rear Axle Shaft Seal and/or Bearing Replacement|Page 6953 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 6951