gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Wiper Arm|Testing and Inspection|Page 12920 > < Windshield Washer Reservoir|Service and Repair
Page 1
background image

Wiper Arm: Testing and Inspection

Wiper Arm Tip Pressure Check

1. Run the wiper arms to the mid-wipe position.
2. Remove the wiper blades from the wiper arms. Refer to Windshield Wiper Blade Replacement   (See: Wiper Blade/Service and Repair/Removal

and Replacement/Windshield Wiper Blade Replacement).

3. Attach a scale to the end of the wiper arm and measure the force required to lift the wiper arm perpendicular to the windshield to normal working

height (height with the blade attached).

4. Replace the wiper arm if the measurement is not within the specification. Refer to Windshield Wiper Arm Replacement   (See: Service and Repair

).

*

Driver Side - 8.1-9.5 Newtons (29- 34 Ounces)

*

Passenger Side - 5.8-7.0 Newtons (21- 25 Ounces)

Wiper Arm|Testing and Inspection|Page 12920 > < Windshield Washer Reservoir|Service and Repair