Sierra 1500 2WD V6-4.3L (2008)
1. Connect the front side door cable. Ensure the cable is fully seated past the guide tab.
2. Slide the front side door inside handle assembly into place (2).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
3. Install the front side door inside handle fasteners.
Tighten
Tighten the front side door inside handle fasteners to 2 Nm (18 lb in)
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement See: Front Door Panel/Service and Repair.
