Sierra 1500 2WD V6-4.3L (2008)
7. Carefully install the reservoir retaining pins to secure the reservoir.
8. Place the brake fluid level sensor into the reservoir, press into place to secure the sensor retaining tabs.
9. Remove the master cylinder from the vice.
10. Install the master cylinder. Refer to Master Cylinder Replacement (JD9, JF3, JF7) (See: Master Cylinder Replacement (JD9, JF3, JF7))Master
Cylinder Replacement (JH6, JH7) (See: Master Cylinder Replacement (JH6, JH7)) .
11. Release the park brake.
12. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair) .
Master Cylinder Replacement (JD9, JF3, JF7)
Master Cylinder Replacement (JD9, JF3, JF7)