Sierra 1500 2WD V6-4.3L (2008)
1. Install the park brake warning lamp switch.
Notice: Refer to Fastener Notice .
2. Install the park brake warning lamp switch bolt.
Tighten the bolt to 3 N.m (27 lb in).
3. Connect the park brake warning lamp switch electrical connector.
4. Install the left side instrument panel electrical center/junction block. Refer to Instrument Panel Electrical Center or Junction Block Replacement -
Left Side .
5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery) Battery Negative Cable
Disconnection and Connection (w/Auxiliary Battery) Battery Negative Cable Disconnection and Connection (w/Dual Batteries) .
