Sierra 1500 2WD V6-4.3L (2008)
Notice: Refer to Fastener Notice .
1. If equipped with RPO LY6 (6.0L) engine, perform the following:
1. Install the oil cooler hose assembly and a NEW gasket.
2. Install the oil cooler hose adapter bolts (2).
Tighten the bolts to 12 N.m (106 lb in).
3. Install the oil cooler hose bracket bolt.
Tighten the bolt to 25 N.m (18 lb ft).
2. If equipped with a RPO L76 (6.0L) engine, perform the following.
1. Install the oil cooler hose assembly and a NEW gasket.
2. Install the oil cooler hose adapter bolts (2).
