Sierra 1500 2WD V6-4.3L (2008)
Parking Brake Warning Switch: Service and Repair
Parking Brake Indicator Switch Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (w/Single Battery) Battery Negative Cable
Disconnection and Connection (w/Auxiliary Battery) Battery Negative Cable Disconnection and Connection (w/Dual Batteries) .
2. Without disconnecting the electrical connectors, remove the left side instrument panel electrical center/junction block and position aside. Refer to
Instrument Panel Electrical Center or Junction Block Replacement - Left Side .
3. Disconnect the park brake warning lamp switch electrical connector.
4. Remove the park brake warning lamp switch bolt.
5. Remove the park brake warning lamp switch.
Installation Procedure
