Sierra 1500 2WD V6-4.3L (2008)
6. Disconnect the EVAP vent solenoid pipe quick connect fitting (3) from the EVAP canister.
7. Remove the EVAP vent solenoid pipe clip (1) from the frame crossmember.
8. Insert a small flat bladed tool between the EVAP canister vent solenoid and the fuel tank bracket, disengaging the retainer (1).
9. Slide the EVAP canister vent solenoid off the bracket towards the passenger side of the vehicle.
10. Remove the EVAP canister vent solenoid from the vehicle.
Installation Procedure