Sierra 1500 2WD V6-4.3L (2008)
Fuel Meter Body: Service and Repair
Fuel Meter Body Assembly Replacement
Removal Procedure
Important: An 8-digit part identification number is on a mylar label affixed to the fuel meter body. Refer to this number if servicing or part
replacement is required.
1. Remove the upper intake manifold.
2. Reposition both sides of the fuel meter body bracket (1) until the tabs disengage from the fuel meter body, and lift the fuel meter body up.
3. Remove and discard the fuel meter body seal.
Notice: Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.