Sierra 1500 2WD V6-4.3L (2008)
4. If installing the old sensor, apply sealant to the threads of the sensor. Refer to Sealers, Adhesives, and Lubricants (See: Engine, Cooling and
Exhaust/Engine/Specifications/Sealers, Adhesives, and Lubricants) for the correct part number.
5. Using J 41712 , install the sensor.
Tighten the sensor to 30 N.m (22 lb ft).
6. Connect the fuel pump/oil pressure sensor electrical connector (3).
7. Check and adjust the engine oil level, if necessary.
