Sierra 1500 2WD V6-4.3L (2008)
Notice: Refer to Fastener Notice .
2. Install the power steering fluid cooler bolts (2) to the power steering fluid cooler (1).
Tighten the bolts to 9 N.m (80 lb in).
3. Connect the power steering fluid cooler hose (3) to the power steering pump (1).
4. Connect the power steering gear outlet hose (2) to the power steering fluid cooler (4).
5. Clean any excess fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair) .
7. Install the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) Radiator Grille Replacement (GMC) .
