Sierra 1500 2WD V6-4.3L (2008)
Suspension Strut / Shock Absorber: Technical Service Bulletins
Suspension - Revised Shock Component/Spring Replacement
Bulletin No.: 07-03-08-008
Date: October 31, 2007
SERVICE MANUAL UPDATE
Subject:
Revised Shock, Shock Component, and/or Spring Replacement
Models:
2007-2008 Cadillac Escalade Models
2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2007-2008 GMC Sierra, Yukon Models
This bulletin is being issued to revise the Shock, Shock Component, and/or Spring Replacement procedure in the Front Suspension sub-section of the
Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
Special Tools
J 45400 Spring Compressor
Removal Procedure
Use only hand tools to perform the following service procedure.
The following service procedure is to be performed after the strut assembly has been removed from the vehicle and installed in the appropriate tool.
Install the shock absorber assembly in the J 45400.
