Sierra 1500 2WD V6-4.3L VIN X (2004)
2. Install the splash shield (15 series).
3. Install the hub and bearing assembly.
4. Install the tire and wheel assembly.
5. Remove the safety stands.
6. Lower the vehicle.
(15 Series W/O NYS)
Disc Brake Backing Plate Replacement - Rear (15 Series w/o NYS)
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer Vehicle Lifting
3. Remove the tire and wheel assembly.
4. Relieve the tension from the park brake cables by loosening the nut at the equalizer.